Light Trade Stopper - For ladders up to 14"(356mm) wide - 16" is a Non Stock Item
�25.00 + Carr & VAT
Trade Stopper - For ladders up to 16" (406mm) wide
�49.00 + Carr & VAT
Industrial Trade Stopper - For ladders up to 22"(559mm) wide
�65.00 + Carr & VAT
Euro Industrial Stopper - For ladders up to 34"(862mm) wide
�90.00 + Carr & VAT
Carries up to 10 brace, all lengths & all makes
Allows total control when transporting
Made from toughened lightweight plastic
Easy storage of braces when not in use
Transporting towers will never be easier
Compatible with all sizes and all manufacturers - including Youngman BoSS
Height of the unit 398mm
Width of the unit 200mm
Handle Soft grip moulded
Separate components None
Material spec Toughened polypropylene
�59.94 inc VAT on special offer
Manual handling, how important is it to you?
More than a third of all over-three-day injuries reported each year to HSE and
local authorities are caused by manual handling.
Ladder Gripper Pads
On Offer, �39.95 + VAT (�47.94 inc VAT)
FREE delivery on this
item (typically within 3 working days)
Professional �69.99 Inc VAT
Ladder Anti Slip Device
The Ladder M8rix™ is a simple safety device that sits under the feet of your ladder, preventing it from slipping.
Made from durable moulded Polypropylene, the safety device consists of a two stainless steel plates secured by galvanised topping screws. The fine metal grips situated on both sides of the Ladder M8rix™ hold the ladder feet in place, whilst preventing any slippage on the ground surface. Whilst we would not recommend unwise ladder use, the Ladder M8rix™ provides such a high degree of security that it can even be used on such surfaces as:
The Professional version is shown above. There is also an industrial
version, +�11.00 with metal grips as well as out, this is suitable for
work in bad conditions where the ladder feet could also be slippery,
greasy, muddy etc.
Ladder Safety Inspection Tags
Genuine Scafftag Kit of Ten (10) ladder tags and 10 holders, also includes one permanent pen
A complete Ladder Tag safety management system, checking for damage, faults and wear
Provides system, procedural and legal compliance
A life saver for a very small price
Easy to use and weather resistant
Provides a clear inspection trail giving integrity and control of work carried out
Saves valuable time when preparing safety audits
Provides a clear record of procedures to comply with statutory legislation and codes of practice
Essential for companies working with ISO9000 clients
Set of 10 tags with holders and free permanent marker pen �45 + VAT
Before or failed inspection - do not use ladder
Record of inspection green / yellow face
Do not remove warning on reverse
Scafftag Yellow Ladder Inspection Book
�27.50 + VAT
At a glance data sheets for ladder classification, duty, uses and loading, frequency and type of ladder inspection
Details of the laddertag system components
Health and safety guidance and information
Risk assessment - a guide to key steps involved
Ladder register - to view details of all your ladders
Inspection reports in duplicate
Fault notification reports in triplicate
Spare laddertag inserts
Free wall poster
A kit of 10 towertag holders and 20 towertag inserts with two permanent marker pens �55.00 + VAT
Tower tag ensure compliance with HSE regulations
High visibility insert provides details of inspection for all types of scaffolding tower
Tower & Scaffolding Green Book �15.00+VAT (choose at the checkout)
Ankalad Ladder Leveler -
sorry, uk manufactured ceased trading
Fits any ladder with styles up to 85mm x 25mm
Simple to adjust
Stays permanently fitted to ladder
Adjust for incline in either direction 75mm up or down
50 positions in 3mm steps
UK Design & Manufacture
Total weight is only 1kg
Working on an incline is no longer a problem with the Ladder Leveller. A vernier style adjustment system ensures the ladder foot is secure whatever the gradient.
It can be used together with our Stabilizer to provide maximum ladder security.
Standard version for all ladders over 2.5m long (special version available for shorter ladders)
Easily, quickly and permanently fitted to any ladder
Positioned in less than 1 minute
Weighs only 3.6KG
Safe working load 150Kg
Folds flat alongside ladder for easy storage and transport
Two pairs of aircraft grade of aluminium telescopic struts
Can be used on uneven ground
The HSE operation circular OC 233/3 of March 19th 1997 confirms that the ANKALAD ladder stabiliser is an acceptable as an alternative to footing a ladder
The DTI report URN 99/707 "Assessment of leaning ladder safety devices" which was produced following an assessment of over 80 different devices states that "overall, most of the stabilisers were considered to be of limited benefit. However Code DB(ANKALAD) proved to be clearly the most effective stabiliser, as the structure created by fitting the device was close to self supporting.
�85.00 + Vat
An Ankalad Stabiliser secures a ladder in much the same way as stabilisers secure a child's first bike.
Correctly positioned it's impossible for the ladder to slide down the wall or side over sideways due to over-reaching - which is the real killer and cause of 9 out of 10 accidents.
Ankalad weighs just 3.6kg (8lbs) and is built to a quality using the finest materials, namely
anodised aluminium, zinc plated steel, brass, stainless steel and nylon mouldings.
The Ankalad exceeded the HSE stabiliser test by 300%.
�42.00 Inc VAT DISCONTINUED
sorry, uk manufactured ceased trading
There are many stand-offs around but a couple of features make our stand-off special
Large (120mm diameter) wheels assist in running up the wall and stop slide ways slip A central V-notch enables the ladder to be used on corners
The stand-off is contracted of lightweight aluminium with zinc plated fixing and springs making it light and easy to use.
As with all our equipment the stand-off can be used in conjunction with our other products to provide a secure and safe working environment.
The staging bracket attaches quickly and simply to existing ladders. When used with ladders fitted with our Ladder Stabiliser this provides an exceptionally secure and safe high level work platform which will meet the approval of your H&S Inspector.
Very strong aluminium construction
Simple to use
Use your existing ladders
270kg load rating - evenly distributed
Available in 600mm and 900mm (2 x 450mm) widths
NEW version, conforms to BS EN13374 - Class A
Information leaflet here
Staging Kit Assembly Instructions
STAGING SYSTEM KITS
Price Ex Vat
�535.00 + VAT
�635.00 + VAT
�690.00 + VAT
Complete kits of staging system including brackets, staging boards (600mm wide), handrails, posts, mid-board posts (where necessary), leading edge toe boards and end rails. NEW 2010 version, conforms to BS EN13374 - Class A). Kits exclude Stabilizers.
Working for long periods on a ladder leads to aching painful feet and in many cases can cause permanent foot arch damage.
The Step fits ladders with a tread rise of between 250mm and 300mm in increments of 12mm. It's constructed of zinc plated mild steel and features a checker plate pattern to stand on.
With body weight correctly positioned on the Step less strain is placed on the legs and lower back, retaining balance. This in turn reduces fatigue and stress, allowing the use of both hands to operate equipment safely.